Toyota Owner's Manuals

Download PDF or read online

All Toyota models in the World

TOYOTA / LEXUS KEY LEARNING MANUAL

Operational manual, user handbook and repair guide

Toyota Owners Manuals > Toyota Important Manuals > TOYOTA / LEXUS KEY LEARNING MANUAL

This Key Learning Manual Work with models:
TOYOTA: RAV4, Land Cruiser 100 (120), Yaris(2006+), Camry (2004...08), Corolla (2007+).
LEXUS: LX470, RX300, RX350, RX400(h), GS300, GS430, GS450, ES350, IS220, IS250, LS460(old).


The driver’s door must be open during the entire process!!!

Models without a “SMART-key”:

1. Insert a new key in the ignition (Do not ignition switch ON!!!).
2. Connect device to the connector OBD-II.
3. Wait within 10…30 second. Until the green LED lights up constantly. Should also be lighted SECURITY led.
4. Put out the key from ignition at a distance not less than 15 cm from ignition lock at the time 1..2 sec.
5. Insert the key into ignition – SECURITY indicator will go out (not light) – key accepted.
6. Put out the key from ignition.
7. If necessary, insert a second key into ignition and repeat from step №5.
8. Switch ignition ON and OFF 5 times.
9. Disconnect device from the connector OBD-II.


Models with “SMART-key”:

1. Connect device to the connector OBD-II.
2. Wait about 15 minutes! (Green LED will blink continuously during this period of time) until the blink red LED (blinking
red LED will be accompanied by intermittent beep).
3. Within 30 second touch with new key to “START” button – hear the first beep.
4. Hold the key near “START” button, wait until you hear a second beep. If no signal for 5 second – key is not accepted.
5. Similarly, repeat process with the item №3 for the remaining keys.
6. Disconnect device from the connector OBD-II.




 



Navigate through the articles
Previous article ABRITES Commander for TOYOTA LEXUS SCION User Manual Toyota OBD-II DTC Next article
More news